Dräger X-am 7000 is the innovative solution for the simultaneous and continuous measurement of up to five gases. A combination of more than 25 sensors allows flexible solutions to individual monitoring tasks. It is the ideal companion in a variety of applications where the reliable detection of oxygen, toxic and combustible gases and vapors is necessary.
The extensive portfolio of over 25 different DrägerSensors allows the detection of more than 100 gases and vapors. The measuring range of the EC, Cat-Ex, IR and PID sensors can be changed to another gas within a list of gases by a push of a button – without the necessity of re-calibrating. In this way the instrument can be adapted easily to various applications. DrägerSensors are renowned for fast response, minor cross sensitivities, high accuracy and long life.
Each sensor is recognized automatically by the instrument. All sensors are pre-calibrated, and a reconfiguration of the Dräger X-am 7000 is done by simply changing a sensor. I.e. no additional service or maintenance is necessary. Intuitive software functions The software menu of the Dräger X-am 7000 was designed in partnership with our customers making it simple and easy to use. Functions such as TWA and STEL values, as well as functions, like peak hold can be viewed or switched on quickly and with minimal training.
The built-in high-performance pump makes it possible to sample gas using a hose up to 45 m/150 ft. long. The operation of the pump is continuously monitored, and the instrument will generate an alarm if the flow of gas reduces. The instrument is equipped with an internal plug and play pump pump included adapter. This powerful pump allows sampling via a hose or tube up to 45 m.
The software menu within the Dräger X-am 7000 was designed in partnership with our customers making it simple and easy to use. With the help of Dräger CC-Vision software, up to 5 different detection applications can be saved within the instrument. By doing so, the use of different instrument configurations can be set for that specific application. During operation, a simple change between these set parameters can be done via the instrument's menu.
The built-in high power pump allows to sample gas through an up to 45 m/150 ft. long tube. The operation of the pump is continuously monitored, and the instrument will generate an alarm if the flow is too low.
Article | Description | |
Complete sets | ||
8317400 | Dräger x-am 7000 basic instrument, exclusive battery, including pump and datalogger | |
Description Dräger x-am 7000 basic instrument, exclusive battery, including pump and datalogger | ||
8317400/2 | Dräger X-am 7000 basic instrument and two DrägerSensors EX/O2, including pump and datalogger | |
Description Dräger X-am 7000 basic instrument and two DrägerSensors EX/O2, including pump and datalogger | ||
8317400/3 | Dräger X-am 7000 basic instrument and three DrägerSensors EX/O2/H2S, including pump and datalogger | |
Description Dräger X-am 7000 basic instrument and three DrägerSensors EX/O2/H2S, including pump and datalogger | ||
8317400/4 | Dräger X-am 7000 basic instrument and four DrägerSensors EX/O2/H2S-LC/CO, including pump and datalogger | |
Description Dräger X-am 7000 basic instrument and four DrägerSensors EX/O2/H2S-LC/CO, including pump and datalogger | ||
Sensors | ||
6809130 | DrägerSensor XS O2 - LS | |
6811365 | DrägerSensor XS EC H2 HC | |
6809110 | DrägerSensor XS EC H2S | |
6809145 | DrägerSensor XS EC NH3 | |
6809105 | DrägerSensor XS EC CO | |
6809110 | DrägerSensor XS EC H2S 100 | |
6810260 | DrägerSensor XS R H2S | |
6810460 | DrägerSensor IR EX | |
6810590 | DrägerSensor Smart IR CO2 | |
6810599 | DrägerSensor Smart IR CO2 HC | |
6812970 | DrägerSensor Smart CatEx HC PR | |
6812980 | DrägerSensor Smart CatEx PR | |
8313648 | Water- and dustfilter (incl. 6 cm hose) for pump | |
8319100 | DrägerSensor Smart PID | |
8317604 | Set of sensors sealings, 5 pieces | |
8317805 | Set of sensormembrame, 5 pieces | |
PID parts | ||
8319110 | PID lamp | |
8319111 | Cleaningset for PID light | |
8319405 | PID sensor cap | |
8319406 | PID ionization cell | |
Batteries and chargers | ||
8317454 | NiMH-power pack 4,8V/6,0Ah | |
8312645 | Vehicle construction charger 12V/24V, for use with loading module (8316487) and vehicle adapter (8318169) | |
Description Vehicle construction charger 12V/24V, for use with loading module (8316487) and vehicle adapter (8318169) | ||
1822667 | Dräger: Battery, GPLI 3 V, 38 mAh LV00602 | |
8317550 | Battery holder T4 (without battery) | |
8317447 | Alkaline battery T4 (4 pieces) | |
8318646 | Part set chassis for X-am 7000 | |
8317137 | Plug seal | |
8316487 | Charging module | |
8325736 | Adapter | |
8316994 | Dräger X-am 7000: single charger (worldwide) for charging modules, max. 2 charge modules | |
Description Dräger X-am 7000: single charger (worldwide) for charging modules, max. 2 charge modules | ||
8315805 | Power supply for charging modules - up to 20 modules | |
8318169 | Vehicle construction holder, for use with 1 loading module (8316487) and vehicle adapter (8312645) | |
Description Vehicle construction holder, for use with 1 loading module (8316487) and vehicle adapter (8312645) | ||
8317705 | E-cal module | |
Spare parts | ||
8317836 | Sealing plate, complete | |
8317538 | Cap for X-am 7000, complete | |
8317337 | Set dummy plug (2x blindstop / 2x stop for company without pump) | |
8316870 | Grid | |
8317682 | Brush strap for support kit 8316878 | |
1315781 | Screw M44X6 DIN 965 | |
8317401 | Print board | |
8317091 | Divider print board | |
8317431 | Print board sensor | |
8320357 | Print board display | |
8317585 | Window IR | |
8326840 | Set pumpmembrane, 2 pieces - Europe | |
8318607 | Set pompmembrane, (2x) and water- and dustfilter (3x) - worldwide | |
8317540 | Red push button | |
8320450 | IP 67, parts set (2x sub-d-charger internal sealing (6408233) / 2x sub-d-sealing accu (8317137) / 2x screw cap (1390034) / 4x screw sub-d-charger (1339931) / 1x membrane DAE (8316421) | |
Description IP 67, parts set (2x sub-d-charger internal sealing (6408233) / 2x sub-d-sealing accu (8317137) / 2x screw cap (1390034) / 4x screw sub-d-charger (1339931) / 1x membrane DAE (8316421) | ||
8316421 | Membrane DAE | |
8317397 | Rubber housing | |
8317406 | Interne plug and play pump X-am 7000 | |
Accessories | ||
8317656 | Calibration adapter | |
8317639 | Pumpadapter | |
8322730 | Carrying case, black | |
8317542 | Holder for Dräger X-am 7000 | |
8317683 | Leather carrying case | |
8318371 | 5 meter extension hose and driver for Dräger X-am 7000 | |
8318105 | Tire for vehicle construction holder | |
8318374 | Pumpadapter with gasconnection | |
8316878 | Carrying frame (carrying strap with plate without chest strap) | |
8317804 | Upgrade pump, incl. pump adapter | |
8317423 | Seal for X-am 7000 | |
Beurtschipperstraat 1
3194 DK Hoogvliet
The Netherlands
+31 (0) 10 295 2740
sales-mo.sd.nl@draeger.com