Easy to use, stand-alone and portable. With the Bump Test Station, functionality tests of gas detection and warning devices can be carried out easily and quickly.
The Bump Test Station has no requirement of any power source and can thus be used at any location. The easy to use Bump Test Station checks whether the instrument in question is responding to a known concentration of gas. The gas provided by the Bump Test Station flows through the dust and water filter to the sensor(s) confirming correct functionality of the gas detector ensuring compliance with country-specific requirements and regulations, standards, recommendations, etc.
To test the device using a known gas concentration is the only way to guarantee a reliable, precise measurement and functionality against a gas hazard and to ensure correct warnings against them.
If the test is not completed successfully, the device has to be adjusted/calibrated. This calibration is capable of being carried out automatically on the Bump Test Station.
Article | Description | |
8319130 | Dräger bump test station for X-am 1/2/5x00, including test cylinder | |
8319131 | Dräger bump test station for X-am 2/5/5X00, excluding test cylinder | |
8319072 | Dräger bump test station for X-am 7000, including calibration gas cilinder 58 liters | |
Description Dräger bump test station for X-am 7000, including calibration gas cilinder 58 liters | ||
8317410 | Dräger bump test station for PAC serie | |
Beurtschipperstraat 1
3194 DK Hoogvliet
The Netherlands
+31 (0) 10 295 2740
sales-mo.sd.nl@draeger.com